| IEEE Standard | IEEE 802.3 10Base-T Ethernet |
| IEEE 802.3u 100Base-TX Fast Ethernet |
| IEEE 802.3x flow control, back pressure flow control |
| IEEE 802.3af PoE (Power over Ethernet) |
| IEEE 802.3at PoE+ (Power over Ethernet enhancements) |
| Switch Architecture | Back-plane (Switching Fabric): 1.6Gbps (Full wire-speed) |
| Data Processing | Store and Forward |
| Flow Control | IEEE 802.3x flow control, back pressure flow control |
| MAC Address Table | 1 K |
| Packet Buffer Size | 448Kbits |
| Network Connector | 8x M12 D-code Female |
| 10/100Base-TX Auto negotiation speed |
| Auto MDI/MDI-X function |
| Full/Half duplex |
| Network Cable | UTP/STP Cat. 5e cable above |
| EIA/TIA-568 100-ohm (100meter) |
| Protocols | CSMA/CD |
| LED | System: Power 1 (Green), Power 2 (Green) |
| Per: Link/Active (Green) |
| PoE: ON (Green) |
| Reverse Polarity Protection | Present for power input |
| Overload Current Protection | Supported |
| PoE Standard | IEEE 802.3af, IEEE 802.3at |
| PoE Power Budget | Maximum PoE output power budget 120W (30W/per port), Regulated PoE output voltage at 50VDC |
| Power Supply | Provides 1x M23 (5-Pin, male) for redundant dual DC, 24/48V (20~57VDC) input power |
| Built-in very high efficiency (97~98%) to boost PoE output voltage to 50VDC |
| Regulate PoE output voltage (50VDC) to stabilize PoE device, and guarantee delivery PoE power distance to 100 meters |
| Power Consumption | |
| Input Voltage | Total Power Consumption | Device Power Consumption | PoE Budget | Boost Efficiency | | 24 VDC | 125W | 3.6W | 120W | 98% | | 48 VDC | 127W | 4.3W | 120W | 97% | |
| Operating Temperature | -10°C~60°C (ITP-800A-8PH24) |
| -40°C~75°C (ITP-800A-8PHE24) |
| Operating Humidity | 5% to 95% (Non-condensing) |
| Storage Temperature | -40°C~85°C |
| Housing | Rugged metal, IP40 protection housing, and fanless |
| Dimensions | 64 x 71.5 x 219 mm (D x W x H) |
| Weight | 860g |
| Installation Mounting | Wall mounting |
| MTBF | 937,878 Hours (MIL-HDBK-217) |
| Warranty | 5 years |
